Clevo N350TW - Docking Station Interaction Procedures; Hot Docking;Undocking & Power Saving Modes; Moving the Docking Station Safely; Power Supply for Docked Systems

Disassembly
Removing the System Memory (RAM) 2 - 9
2.Disassembly
Removing the System Memory (RAM)
The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
DDR3L Up to 1600 MHz. The main memory can be expanded up to 16GB. The total memory size is automatically de-
tected by the POST routine once you turn on your computer.
Memory Upgrade Process
1. Turn off the computer, turn it over to remove the battery (page 2 - 5).
2. Locate the component bay cover and remove screws - .
3. Slide the component bay cover until the cover and case indicator
are aligned and remove it (Figure 5b).
1
4
5
6
2
1
3
b.a.
5
4
6

5. Component Bay Cov-
er
•4 Screws
Figure 5
RAM Module
Removal
a. Remove the screws.
b. Remove the cover.