Preface
VIII
Preface
Related Documents
You may also need to consult the following manual for additional information:
User’s Manual on CD/DVD
This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup pro-
gram. It also describes the installation and operation of the utility programs provided with the notebook PC.
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. When first setting up the computer use the following pro-
cedure (as to safeguard the computer during shipping, the
battery will be locked to not power the system until first con-
nected to the AC/DC adapter and initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack on the
right of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC
adapter. The battery will now be unlocked.
6. Use one hand to raise the
lid/LCD to a comfortable viewing
angle
(do not exceed 180 degrees)
;
use the other hand (as
illustrated in Figure 1) to support the base of the computer
(Note: Never lift the computer by the lid/LCD).
7. Press the power button on the left side of the computer to
turn the computer “on” (note that the lid/LCD must be open
for the power button to function).
Powering the
Computer On
After every disassem-
bly, make sure that the
bottom case’s screws
are all inserted and
tightened before turn-
ing the computer on.
Shut Down
Note that you should always
shut your computer down by
choosing Shut Down command
in Windows.
This will help prevent hard disk
or system problems.
Figure 1
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In
180°
To Next Page
Loading...
