Clevo P870KM

Modules
Setting Up SATA RAID, Optane™ or AHCI Mode 6 - 7
6
9. Select Create RAID Volume and press <Enter>.
10. You can now setup your RAID volume using any two installed disks.
11. Go to Name: and press <Enter>.
12. Type a name of your choice for your RAID volume and press <Enter>.
Figure 6 - 1
Create RAID Volume
(Advanced > Intel(R)
Rapid Storage
Technology
Figure 6 - 2
Name the RAID
Volume (Advanced
> Intel(R) Rapid
Storage
Technology)