Control Center & Flexikey®
B - 40 Mouse Settings - Disable
B
Mouse Settings - Disable
You can use the program to disable any mouse button clicks if not required.
1.
Enable
and select the mouse under your chosen profile, click on a mouse button to select it, and then click to
select
Disable
in
Action Type
.
2. The button click will now be disabled.
3. If you want to enable the button again, select it and click on Restore.
4. Click Save to save the settings within your chosen profile.
5. The button click will be disabled under your chosen Profile, and the key will appear in Gray.
Figure B - 31 - Mouse - Disable
To Next Page
Loading...
