Clevo PD70PNT - Page 35

Disassembly
Removing and Installing the Heatsink 2 - 11
2.Disassembly
6. Wipe clean the thermal grease residue from the CPU and VGA (Figure 7e).
7. Carefully remove the metal pad and any metal pad residue off the CPU (Figure 7f). Make sure that the
CPU is properly clean of the thermal grease and metal pad.
8. Remove the absorber pad and mylar pad from the VGA (Figure 7g). Make sure that the VGA is also prop-
erly clean of the thermal grease and metal pad.
15
16
17
18
19
e.
f.
17
16
18
19
g.
15
15

16.Metal Pad
18.Absorber Pad
19.Mylar Pad
Figure 7
Heatsink Removal
(cont’d.)
e. Wipe clean the thermal
grease residue.
f. Remove the mylar and
metal pad off the compu-
ter.
g. Remove the absorber
pad and mylar.