BIOS Utilities
Updating the BIOS / CPU 5 - 3
5
Updating the BIOS / CPU
If you need to update the BIOS please contact your distributor or supplier to obtain
the latest version.
After using the utility to update the BIOS (or if the CPU has been changed) you will
need to press F2 at Boot to enter the BIOS, and then press F9 to load the BIOS
defaults, and then press F10 to save and exit the settings.
After the system restarts you should press F2 to enter the BIOS again and reset the
BIOS settings to your preferences, and then save the final settings.
To Next Page
Loading...
