Video Driver Controls
Display Devices - NVIDIA CP C - 21
C
NVIDIA® Surround View Supports 4 Active Displays using the built-in display plus 3 other from the
HDMI Port, Mini DisplayPorts (or Thunderbolt Port or DisplayPort 1.4 over USB 3.2 Gen 2 Port).
Display Mode Description
Single One of the connected displays is used as the display device
Clone
Clone simply shows an exact copy of the Primary display desktop on
the other displays. This mode will drive multiple displays with the
same content.
Extend
Extend treats connected displays as separate devices, and they act
as a virtual desktop resulting in a large workspace. When enabled,
you can drag any icons or windows across to the other display
desktop. It is therefore possible to have one program visible in one
display, and a different program visible in the other display.
Table C - 1
Display Modes
NVIDIA
Configuring External Displays
You can use the System (in Settings - page C - 7) control panel or the + P (or Fn +
F7 - page C - 6) key combination, to configure an external display.
You can also use the NVIDIA (see page C - 20) control panel to configure external displays.
To Next Page
Loading...
