Video Driver Controls
C - 30 Configure Surround, PhysX®
C
6. The NVIDIA Set Up Surround control panel will pop-up to allow you to configure
the attached displays to your requirements.
7. Click to select displays from the Display menu (and set the Topology) and click
Enable Surround and Apply to save any changes made.
Figure C - 20
NVIDIA Set Up
Surround
Set Up Surround
Settings
Select the Resolution
and Refresh Rate for
your connected displays
from the menu.
The Bezel Correction
section you can adjust
the monitor Bezel (The
outside frame of the mon-
itor) so that the displays
are aligned correctly.
To Next Page
Loading...
