CLIMET INSTRUMENTS CI-154 - Printing Alarms Only

CI-154 User’s Manual
Page 24
Example End of sample printouts (2 channels)
TWO END OF SAMPLE PRINTOUTS
USING LARGE FONT
(2 CHANNELS)
TWO END OF SAMPLE PRINTOUTS
USING SMALL FONT
(2 CHANNELS)
11/16/09 15:30:00
PROGRAM= IN OPERATION
ID= LOCATION 24A
VOLUME= 1.0CF SAMPLE#= 1
FLOW= 1.00 CFM TOTAL COUNT
>5.0 10
>0.5 4367
11/16/09 15:31:00
PROGRAM= IN OPERATION
ID= LOCATION 24A
VOLUME= 1.0CF SAMPLE#= 2
FLOW= 1.00 CFM TOTAL COUNT
>5.0 2
>0.5 784
PROGRAM= IN OPERATION
ID= LOCATION 24A 11/16/09
SAMPLE VOL= 1.0CF SAMPLE#= 1 TOTAL COUNT
TIME >0.5 >5.0 FLOW
15:30:00 4367 10 1.00
PROGRAM= PROGRAM A
ID= LOCATION 24A 06/14/10
SAMPLE VOL= 1.0CF SAMPLE#= 2 TOTAL COUNT
TIME >0.5 >5.0 FLOW
15:31:00 784 2 1.00
Example End of sample printouts (4 channels)
TWO END OF SAMPLE PRINTOUTS
USING LARGE FONT
(4 CHANNELS)
TWO END OF SAMPLE PRINTOUTS
USING SMALL FONT
(4 CHANNELS)
11/16/09 15:30:00
PROGRAM= IN OPERATION
ID= LOCATION 24A
VOLUME= 1.0CF SAMPLE#= 1
FLOW= 1.00 CFM TOTAL COUNT
>5.0 10
>3.0 28
>1.0 959
>0.5 4367
11/16/09 15:31:00
PROGRAM= IN OPERATION
ID= LOCATION 24A
VOLUME= 1.0CF SAMPLE#= 2
FLOW= 1.00 CFM TOTAL COUNT
>5.0 2
>3.0 15
>1.0 247
>0.5 784
PROGRAM= IN OPERATION
ID= LOCATION 24A 11/16/09
SAMPLE VOL= 1.0CF SAMPLE#= 1 TOTAL COUNT
TIME >0.5 >1.0 >3.0 FLOW
15:30:00 4367 959 28 50.0
>5.0
10
PROGRAM= PROGRAM A
ID= LOCATION 24A 06/14/10
SAMPLE VOL= 1.0CF SAMPLE#= 2 TOTAL COUNT
TIME >0.5 >1.0 >3.0 FLOW
15:31:00 784 247 15 50.0
>5.0
2
2.7.3 Printing alarms only
To enable the printout of alarms, while suppressing end of sample printouts, press
[SET-UP] from the mains screen, then press [PRINT ALARMS ONLY] on the line marked
printer. Pressing the [PRINT ALARMS ONLY] key will cause it to turn green; if either the
[PRINTER OFF] key or the [PRINT END OF SAMPLE] key is enabled (green), the previously
enabled keys will turn yellow. Alarms will also print out whenever the end of sample
printouts are enabled. Press [EXIT] to return to the main screen.