CLIMET INSTRUMENTS CI-154 - Page 6

CI-154 User’s Manual
Page vi
2.2.14 How to clear stored data ________________________________ 19
2.3 Changing paper ____________________________________ 19
2.4 Battery operation __________________________________ 20
2.5 Sample settings ___________________________________ 20
2.5.1 Sample volume ________________________________________ 20
2.5.2 Initial delay___________________________________________ 20
2.5.3 Sample delay _________________________________________ 21
2.5.4 Number of samples ____________________________________ 21
2.5.5 Auto-average _________________________________________ 22
2.6 Display modes _____________________________________ 22
2.6.1 Total versus Differential count mode _______________________ 22
2.6.2 Count versus concentration mode _________________________ 22
2.7 Printer settings ____________________________________ 23
2.7.1 Large font ____________________________________________ 23
2.7.2 End of sample printouts _________________________________ 23
2.7.3 Printing alarms only ____________________________________ 24
2.8 Setting alarms ____________________________________ 25
2.8.1 Setting alarm levels ____________________________________ 25
2.8.2 Beeper mode _________________________________________ 25
2.8.3 Alarm indicators on the display ___________________________ 26
2.8.4 Silencing the alarm _____________________________________ 26
2.9 Selecting channels to display _________________________ 26
2.10 Setting date and time _______________________________ 26
2.11 Using IDs ________________________________________ 26
2.11.1 Creating an ID ________________________________________ 27
2.11.2 Selecting an ID ________________________________________ 27
2.11.3 Deleting an ID ________________________________________ 27
2.12 Using programs with IDs and settings __________________ 27
2.12.1 Programs in internal memory _____________________________ 27
2.13 Getting reports ____________________________________ 28
2.13.1 Accessing report screens ________________________________ 28
2.13.2 Settings _____________________________________________ 28
2.13.3 Selecting data to report _________________________________ 29
2.13.4 Printing all stored data __________________________________ 30
2.13.5 Printing alarm data _____________________________________ 31
2.13.6 Printing average data ___________________________________ 32
2.13.7 Printing an ISO 14644-1 (2015) report _____________________ 33
2.13.8 Printing an FS-209E report _______________________________ 34