CI-154 User’s Manual
Page viii
5.2 Monitoring _______________________________________ 72
5.2.1 The where, why, and how of monitoring ____________________ 72
5.2.2 5.2.2 Monitoring hot air sources __________________________ 73
6. Service and maintenance ____________________________ 75
6.1 User maintenance __________________________________ 75
6.1.1 Battery replacement ____________________________________ 75
6.1.2 Fuse replacement ______________________________________ 75
6.1.3 Long term storage _____________________________________ 76
6.2 Analyzing counting irregularities ______________________ 76
6.2.1 High counts, limited to the 0.3 m channel __________________ 76
6.2.2 Similar counts on two or more channels ____________________ 76
6.3 Low laser power ___________________________________ 77
6.4 Low flow rate _____________________________________ 77
6.5 Calibration service _________________________________ 77
7. Frequently asked questions __________________________ 79
8. Appendix ________________________________________ 83
8.1 Legacy Modbus coils ________________________________ 83
8.2 Legacy Modbus® Diagnostic Functions __________________ 83
8.2.1 Example Diagnostic Commands: __________________________ 84
EU Declaration of Conformity _____________________________ 87
To Next Page
Loading...