BT15B012GB-00 ELFOFresh² 19
Air renewal in the room
The correct distribution of air in domestic environments.
ELFOAir is the modular air distribution system with manifolds that consists
of an air distribution box, at exible ducts, horizontal and vertical
moulded curves, seal and joint rings, diusers and accessories made with
plastic material and is ideal to guarantee the correct distribution of air in
dierent environments.
▶
The manifold distribution ensures the self-balancing of the system and
therefore guarantees maximum exibility in positioning the supply/
return grids and outlets and the correct air speed inside the ducts.
▶
The distribution to manifolds allows better system balancing and
therefore guarantees maximum exibility in positioning the inlets and
supply/return grilles and the correct air speed inside the ducts.
▶
The exible duct is easy to install and can be connected to all the other
components of the system without the need for special equipment.
The insulation of the channelling removes the risk of condensation
forming on the external surfaces of the ducts themselves.
▶
The ELFOAir Air system includes a comprehensive series of accessories
that are essential to ensure the installation and the perfect operation
of the aeraulic distribution of ELFOFresh
2.
ELFOAir Congurator
Thanks to ELFOAir Congurator, the selection and dimensioning software, the ELFOAir solution is designed in little time and with no errors.
A simple and powerful tool, available from www.clivet.com, that provides an essential support for all professionals to install the ELFOFresh
2
air renewal system.
ELFOFresh
2
ducts
ELFOFresh
2
’s connection to the distribution system of the internal and
external air is conducted by using exible insulated circular ducts that
guarantee the thermal and acoustic insulation of the channels.
The antibacterial treatment of the inner surfaces ensures the quality of
the fresh air. The reduced pitch of the spiral ensures a greater mechanical
strength compared to traditional solutions and does not alter the duct’s
cross-section, even if there is a large radius of curvature.
To Next Page
Loading...
Need help?
General
