CLIVET WiSAN-YME 1 S 2.1 User Manual

115
Control
9.8 Unit ON/OFF
The black selection cursor must not be present when switching
the unit on/o.
Press the ON/OFF button for 5 seconds.
01-01-2021 9:00
7
OFF
ON
OFF
ON
ON/OFF
9.9 Controls OFF/ON
On the interface it is possible to switch on or o the unit for
room heating or cooling.
• Switching the unit on or o can be controlled from the
interface if the room thermostat is set to NO.
• Press the LEFT or UP button on the page and the black
cursor will appear.
1 When the cursor is on the system temperature side (Cool
mode, Heat mode, Auto mode), press the ON/OFF button
to switch the heating or cooling mode on/o.
2 Press the RIGHT button, the cursor is on the DHW side,
press the ON/OFF button to switch the DHW on/o.
01-01-2021 9:00
7
OFF
ON
OFF
ON
7
OFF
ON
OFF
ON
7
OFF
ON
OFF
ON
8:00
7
OFF
ON
OFF
ON
01-01-2021 9:00
7
OFF
ON
OFF
ON
7
OFF
ON
OFF
ON
ON/OFF ON/OFF
01-01-2021 9:00
7
OFF
ON
OFF
ON
7
OFF
ON
OFF
ON
OFFOFF

CLIVET WiSAN-YME 1 S 2.1 Specifications

General

Brand	CLIVET
Model	WiSAN-YME 1 S 2.1
Category	Heat Pump
Language	English