CLIVET WiSAN-YME 1 S 2.1 User Manual

116
Control
If DHW MODE SETTING is set to NO, the following pages will
be displayed without the DHW function.
01-01-2021 9:00
7
OFF
ON
OFF
ON
7
OFF
ON
OFF
ON
ON/OFF ON/OFF
01-01-2021 9:00
7
OFF
ON
OFF
ON
7
OFF
ON
OFF
ON
OFFOFF
The room thermostat can be used to switch the unit on or o
for heating or cooling the room.
If the room thermostat is set to:
• DOUBLE ZONE, ONE ZONE = the unit can be
switched on or o with the room thermostat.
Pressing ON/OFF on the interface displays the following
page.
• MODE SETTING = can be switched on or o with the room
thermostat and also controls the heating and cooling mode
(see FOR SERVICEMAN section).
01-01-2021 9:00
7
OFF
ON
OFF
ON
Cool or heat mode is closed.
Open the mode with the room
thermostat.
OK
CONFIRM

CLIVET WiSAN-YME 1 S 2.1 Specifications

General

Brand	CLIVET
Model	WiSAN-YME 1 S 2.1
Category	Heat Pump
Language	English