34
5 - ELECTRICAL CONNECTIONS
5.28 ROOM CHRONOTHERMOSTAT MODE 5.27 UNIT INTERFACE MODE
In this mode is possible to access to stata, parameters and
alarms of the unit.
If the keypad is removed from the base, it goes to
CHRONOTHERMOSTAT mode as soon as the button is
pressed.
In this mode the ambient temperature is measured, the
system’s pump, the units, the system’s accessories and
scheduling are manged.
If the keypad is not inserted in the base, the ON OFF
modifications and the unit seasons are memorized when the
keypad is repositioned on the base
Max. 1000 mt
Max. 80 mt
Move dip-switches with the unit OFF.
ON
clivetbus
RS485
OFF
MAX 80 mt
MAX 1000 mt
clivetbus
RS485
To Next Page
Loading...
