16
®
y (estimated). . Potential for destruction of ozone ODP (R-11 = 1)=0. Potential greenhouse effect (GWP): (HGWP) = 0,58. Low
absorption in ground and sediments log Koc= 1,3-1,7
- Bioaccumulation: Practically non-absorbable by biological organisms log pow 1,48
Forane 134a
- Mobility: Rapid evaporation t ½ life 3 h (estimated)
- Durability/degradability: Not easily biodegradable in water: 3% after 28 days. In the atmosphere degradation at rate of 3% after 28
days (estimated). Potential for destruction of ozone ODP (R-11 = 1)=0. Potential greenhouse effect (GWP): (HGWP) = 0,26.
- Bioaccumulation: Practically non-absorbable by biological organisms log pow 1,06
NOTES CONCERNING DISPOSAL
Disposal of product: recycle or give to a centre specialized in disposal.
INFORMATION ON SHIPPING
Consult the ELF ATOCHEM safety service for supplementary information and updates
ONU number 3163. RID/ADR class 2 figure (and letter) 4° a
Regulations: No. danger/No. material 20/3163 label 2
IMDG class 2.2 ONU (IMDG) 3163
Regulations: 2.2 /2 label
IATA class 2.2 ONU (IATA) or No.ID 3163
Regulations: 2.2 /2 label
INFORMATION ON REGULATION
EEC directives
Security reports: D.91/155/CEE modified by D.93/112/CEE: Dangerous substances
Classification/CE mark
Dangerous manufactured compounds: Not classified as dangerous
Inventory: EINECS compliant
OTHER INFORMATION
Recommended uses: low-temperature coolant
Bibliographical references: Encyclopedie des gas (Air Liquide-ed.1976- ELSEVIER AMSTERDAM)
R-22
IDENTIFYING ELEMENTS FOR THE SUBSTANCE
- Product name: forane 22 N°SDS 0005/7
- Supplier: ELF ATOCHEM ITALIA, 4 cours Michelet Cedex 42, 92091 Paris, France. Tel: 00331 49.00.80.80
INFORMATION CONCERNING COMPOSITION OF COMPONENTS
Chemical nature of the compound: Mixture based on:
- Chlorodifluoromethane halogenated hydrocarbon N° CAS 75-45-6 EINECS 200-871-9
IDENTIFICATION OF RISK
- Effects on health: practically non-toxic
- Greatest physical and chemical dangers: Thermal decomposition in toxic and corrosive products
- Specific dangers/CEE: Dangerous for the ozone layer.
FIRST-AID MEASURES
General information:
- Inhalation: Carry the victim into the open air. Resort to oxygen or artificial respiration if necessary.
- Contact with skin: Frostbite must be treated in the same way as burns.
- Contact with the eyes: Immediate rinsing in abundant water. If irritation should continue, consult an ophthalmologist.
FIRE PREVENTION MEASURES
- Specific dangers: Thermal decomposition into toxic and corrosive products. Hydrofluoric acid. Hydrochloric acid in gaseous form.
Phosgene Carbon monoxides (CO).
- Specific means of intervention: Cool containers/cisterns with jets of water. Prevent any sparks or flames.
- Do NOT smoke.
- Special protection systems for fire-fighting squads: Carry breathing apparatus and wear protective clothing.
MEASURES TO TAKE IN CASE OF ACCIDENTAL SPILLAGE
- Individual precautions: Avoid contact with the skin, eyes and inhalation of vapours.
- In an enclosed space: ventilate or use breathing apparatus (risk of suffocation). NO SMOKING ALLOWED.
- Remove all risk of sparks or flames.
MANIPULATION AND STORAGE
- Technical measures/precautions:Form of storage and manipulation applicable to the products: PRESSURIZED GAS. Ensure
adequate ventilation and evacuation for the level of equipment.
- Advice for use: Prevent sparks and contact with hot surfaces. DO NOT SMOKE.
- Technical measures/Storage procedures: Store at room temperature in the original container. Keep away from flames, hot surfaces
and sparks. Store in a cool, well-ventilated place. Protect full containers from sources of heat to avoid excessive pressures.
- Recommended: Ordinary steel.
- Avoid: Alloy containing more than 2% magnesium. Plastics.
CONTROL OF INDIVIDUAL EXPOSURE/PROTECTION
- Precautionary measures to be taken: Ensure a sufficient exchange of air and/or suction in workplaces.
- Control parameters.
Exposure limits:
Residual Risks
To Next Page
Loading...
Need help?
General
