37
®
Control
1. Configuration Menu
2. Parameter Menu
3. Counter Menu
4. Compressor 1 operating hours
5. Compressor 1 starts
6. Compressor 2 operating hours
7. Compressor 2 starts
8. Compressor 3 operating hours
9. Compressor 3 starts
10. Compressor 4 operating hours
11. Compressor 4 starts
12. Pump 1 operating hours
13. Pump 2 operating hours
COUNTER DISPLAY
The operating hours and starts corresponding to each compressor installed on the unit can be checked. The operating hours of the
pumps can be displayed. The procedure for accessing these values is described in the flow chart.
To Next Page
Loading...
