6
WSAN-YES 18.2-35.2
M0ST10N19-00
Delivery
Before accepting the delivery you have to check:
that the unit hasn’t been damaged during
transport
that the materials delivered correspond with that
indicated on the transport document comparing
the data with the identification label positioned
on the packaging.
In case of damage or anomaly:
write down on the transport document the
damage you found and quote this sentence:
"Conditional acceptance — clear evidence of
deficiencies/damages during transport”
Contest by fax and registered mail with advice of
receipt to supplier and the carrier.
Any disputes must be made within the 8 days owing
the delivery. Complaints after this period are invalid.
Storing
Observe external packaging instructions.
In particular:
minimum ambient temperature -20°C
(possible components damages)
maximum ambient temperature +45°C
(possible safety valve opening)
maximum relative humidity 95%
(possible damages to electrical components)
Handling
Check that all handling equipment complies with the
local safety regulations (cranes, forklift trucks, ropes,
hooks, etc.).
Provide personnel with personal protective equipment
appropriate for the situation, such as hard hat, gloves,
safety shoes, etc.
Follow all safety procedures to ensure the safety of
personnel and materials.
Verify unit weight and handling equipment lifting
capacity.
Identify critical points during handling
(disconnected routes, flights, steps, doors).
Suitably protect the unit to prevent damage
Sollevamento con tubi e cinghie
Lifting with balance
Lifting with spacer bar.
Align the barycenter to the lifting point
Gradually bring the lifting belts under tension,
making sure they are positioned correctly.
Before starting the handling, make sure that the
unit is stable.
Packaging removing
Be careful not to damage the unit.
Recycling and disposing the packaging material in
conformity with local regulations.
2 RECEPTION