EasyManuals Logo
Home>CLIVET>Chiller>WSAT-YSC4

CLIVET WSAT-YSC4 User Manual

CLIVET WSAT-YSC4
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Functional spaces
Safety Zone
See chapter Technical information
Do not smoke or use open flames
within this area
Avoid therefore:
obstacles to the airflow
exchange difficulties
leaves or other foreign bodies that can obstruct the exchange
batteries
winds that hinder or favour the airflow
heat or pollution sources close to the unit (chimneys,
extractors etc)
stratification (cold air that stagnates at the bottom)
recirculation (expelled air that is sucked in again)
positioning below the level of the threshold, close to very high
walls, attics or in angles that could give rise to stratification
or recirculation phenomenons.
Ignoring the previous indications could:
energy efficiency decrease
alarm lockout due to HIGH PRESSURE (in summer) or LOW
PRESSURE (in winter)
Pressure relief valve gas side
The installer is responsible for evaluating the opportunity of
installing drain pipes in compliance with the local regulations in
force (EN 378).
If ducted, the valves must be sized according to EN13136 .
3 - SELECTING THE INSTALLATION SITE
The air flow must not be obstructed

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CLIVET WSAT-YSC4 and is the answer not in the manual?

CLIVET WSAT-YSC4 Specifications

General IconGeneral
BrandCLIVET
ModelWSAT-YSC4
CategoryChiller
LanguageEnglish

Related product manuals