Alarm list - 4
7 - CONTROL
ID Description
fF1013 Circuit blocked due to maximum pressure alarm
ff1014
Indicates a pressure value, on the high pressure side, close to the circuit block threshold for maximum
pressure
fF1015 Circuit blocked due to maximum pressure alarm
ff1016 Indicates a high compression ratio value close to the circuit blocking threshold
fF1017 Blocking of circuit due to minimum compression ratio alarm
fF1018 Circuit blocked due to minimum pressure alarm in Cool mode
FF1019 Blocking of circuit due to maximum compression ratio alarm
ff1034 Circuit drained of refrigerant alarm
FF1046 Low Pressure limit 1.1
ff1047 Forcing defrosting 1.1
FF1048 Defrosting water temp. 1.1
ff1049 Max defrosting time 1.1
ff1050 HpDisableStart
iI0002 Insufficient hydraulic pressure on the user-side
iI0006 Insufficient water flow rate on the user-side
II0007 Unit blocked due to frost protection on the user-side
ii0008 Activation of the pumps on the user-side for frost protection
II0009 Water outlet temperature on the user-side not in keeping with the current operating mode of the unit
II0010 Recovery freeze
iI1017 Insufficient hydraulic pressure in the source system
iI1020 Insufficient water flow rate on the source side
II1021 Unit blocked due to frost protection on the source side
II0042 FCl Water Pressure
II0043 FCI Freeze
ii0047 FCI Flow
iI0052 Insufficient water flow rate in the recovery system
iI0053 Insufficient water flow rate on the recovery side
ff1060 Compressor max discharge temperature
ff1061 Compressor min discharge temperature
To Next Page
Loading...
Need help?
General