MAN. 126 rev.4 Use and maintenance manual S19
64 of 77
7
Troubleshooting
Any operation requiring interventions on the components of
the machine, shall carried out by authorized and trained staff.
Non authorized staff is not allowed to replace the components.
Many components of the MEWP have been calibrated: a correct
calibration of these parts (which is possible only in CMC or in
authorized repair shops) is necessary to assure the safety of the
machine.
The display on the machine panel (Picture 10) allows to read – at any
moment – the machine operational conditions as well as to detect
possible functional anomalies. Reading the corresponding possible
error code, and contacting our Service Centre, it is possible – at any
moment – to detect and solve the problem.
Do not hesitate to contact our Service Centre for any technical
problem which is not identified nor solved by the aforesaid
procedure.
To Next Page
Loading...
Need help?
General
