MAN. 126 rev.4 Use and maintenance manual S19
56 of 77
6
Maintenance
Read carefully and follow sequentially maintenance
instructions and required safety steps.
If any service other than from the following is necessary,
request service authorization and instructions.
Operations indicated by USER are allowed to be performed by the user.
Operations indicated by CMC must only be performed only by CMC or
authorized factory certified repair centers.
Use exclusively CMC original spare parts (or acceptable name brand
genuine equivalent parts).
Frequency of maintenance is indicated in the tables below. By frequency
we mean the normal use of the equipment. For particularly rough and dirty
environments (presence of high dust, sand, etc.) service frequency will
need to be higher. Use your good sense to extend the life of your
equipment.
The correct use of the platform and a continuous regular maintenance are
critical to keep your lift in the best working condition, efficiency and safety.
Frequent washing of the equipment with a power washer (use caution with
high pressure equipment not to damage electronic components, hoses or
blast off safety decals) is important to maintain the proper operation of your
lift. Before washing, set the MEWP in travel position, disconnect electrical
extension cord, turn off combustion engineer and disconnect the battery.
6.1
Daily maintenance
Every day, before starting the MEWP, check the following operations:
Daily operator check list
negative result
of the
inspection: Service by
Check
in the tank
Fill as needed USER
Check
level in the fuel tank
Fill as needed USER
Check
Fill as needed USER
Check
Charge or replace
as needed
USER
Clear
debris. Wipe up any oil spills;
Clean frame and
basket
USER.
Check condition of warning safety
decals and manual in case
Replace if
necessary
USER.
To Next Page
Loading...
Need help?
General
