CMC S19 - Electrical System; Hydraulic System

MAN. 126 rev.4 Use and maintenance manual S19 77 of 77
9  Electrical system 
The electrical system is attached at the end of this manual.
Any operation requiring interventions on the components of
the machine, shall carried out by authorized and trained staff.
Non authorized staff is not allowed to replace the components.
Many components of the MEWP have been calibrated: a correct
calibration of these parts (which is possible only in CMC or in
authorized repair shops) is necessary to assure the safety of the
machine.
10  Hydraulic system 
The hydraulic system is attached at the end of this manual.
Any operation requiring interventions on the components of
the machine, shall carried out by authorized and trained staff.
Non authorized staff is not allowed to replace the components.
Many components of the MEWP have been calibrated: a correct
calibration of these parts (which is possible only in CMC or in
authorized repair shops) is necessary to assure the safety of the
machine