CMC S19 User Manual

MAN. 126 rev.4 Use and maintenance manual S19 76 of 77
 Index 
0  Introduction  1
0.1  Use and maintenance manual  1
0.2  Disclaimer  5
0.3  Where and how to store the manual  6
0.4  Normative references  6
0.5  Amendments and integrations  7
1  Specifications 
 
 8
1.1  Technical sheet and performances  8
1.2  Identification plate  9
1.3 MEWP in travel/closed position  10
1.4  Working diagram and stabilization area 1 11
1.5  Working diagram and stabilization area 2 12
1.6  Loading cycles  13
2  Description and purpose  14
2.1 Definition  14
2.2  Machine purpose  14
2.3  Description of the main components  15
3  Control stations  17
3.1 Machine start/ignition station 17
3.2 Display station 17
3.3 Stabilization station 18
3.4 Crawlers handling control station 19
3.5  Platform control stations  20
3.6 MEWP engine key start position  23
4  Use procedures  24
4.1 Environmental operational conditions  24
4.2  Approach distances for qualified employees – Alternating
current  25
4.3  Loading and unloading of the platform 26
4.4 MEWP use procedures  30
4.5 Emergency operations  37
4.6  Safety rules  46
4.7  Safety devices  49
5  Markings  50
6  Maintenance  56
6.1  Daily maintenance  56
6.2  Weekly maintenance schedule (or every 40 hours) 58
6.3 Monthly maintenance schedule (or every 120 hours) 59
6.4 Three-month maintenance schedule (or 300hrs) 59
6.5  Maintenance after initial 400 hours  59
6.6  Every six-months maintenance schedule (or every 750 hours)
whichever comes first 59
6.7  Annual maintenance and safety inspection schedule, or every
1500 hours, whichever comes first 60
6.8  Two year maintenance and safety inspection schedule  61
6.9  Five-year maintenance and inspection schedule 61
6.10  Safety while performing maintenance  61
6.11 Maintenance: consumables  62
6.12  Servicing  63
7  Troubleshooting  64
8 Control register  65
8.1  Delivery of the MEWP to the first owner  65
8.2  Following ownership transfers  66
8.3  Mechanisms replacement  67
8.4  Replacement of structural elements  68
8.5  Replacement of hydraulic components  69
8.6  Replacement of electrical components  70
8.7  Replacement of safety devices  71
8.8  Considerable failures and relevant repairs  72
8.9  Periodical checks and maintenance journal  73
8.10 Notes  75
9  Electrical system  77
10  Hydraulic system  77

CMC S19 Specifications

General

Brand	CMC
Model	S19
Category	Lifting Systems
Language	English