MAN.234 Rev.3 ENG - Use and maintenance manual S19HD (PRO) page
39
of
83
It is strictly forbidden to tamper with such components. The absence
of the sealing within the machine warranty terms causes the imme-
diate retraction of the warranty as well as the accountability – by the
user – of the liabilities coming from an incorrect functioning of the
safety devices.
Do not remove or modify safety devices;
It is forbidden to modify, remove or replace any MEWP component
(ballasts, tires, batteries, spare tire etc.): this operation could reduce
the machine weight thus impairing its stability;
Wear all the protective cloths and the personal safety devices:
helmets, safety shoes and - according to the type of work - gloves,
hearing protections, respirators, etc.;
Do not use clothes with hanging flaps, scarves, ties or any other ac-
cessory which could be dragged into the moving parts; inform about
the closest fire-extinguishers and first-aid kit.
4.7.3
During the positioning of the MEWP
It is forbidden to operate in situations which are dangerous for the
safety of people;
Do not operate in explosion hazard areas;
Check that the working area is suitable to the MEWP performances
and operations, and that it is enough lit;
Check that the operational stands and the working area are enough lit
and well visible;
If operating in closed or little aired environment, ensure, before starting
the machine engine, that his has appropriate ventilation or convey ex-
haust gases outside:
E
xhaust emissions produced by the MEWP engine are toxic;
Appropriately define the working area through suitable signs; observe
the laws in force about the traffic, in case you use the MEWP where
road circulation is allowed;
Check that nobody is within the MEWP action range.
Stabilize the truck through the outriggers.
Pay the utmost attention during stabilization: check that no one is
inside the stabilization area.
Check that the outriggers rest on a non-soft, solid ground that bears
the load indicated on each stabilizer.
In case of soft ground, use supporting plates.
It is forbidden to place the outriggers on ground roughness: they
could be damaged.
Level the machine in order to let the MEWP operate on a horizontal
plane: max frame inclination 1° - max slope which can be assimilated
by the ground 3°.
4.7.4
During the entrance in the basket
It is absolutely forbidden to use the equipment with loads different
from those indicated on the diagram or for uses which are not al-
lowed;
Do not overload the MEWP;
During the different working operations, the use of the safety
belts is compulsory. Do not fasten the safety belts to external struc-
tures but only to the supplied grips placed in the basket;
To Next Page
Loading...
