31
13 Registration BANK access
z You can save all the instrument settings to the registration BANK.
z There are about 10 registration BANKs in the instrument. If you need save more
registrations, you can use the data dump function to save the registration data to
your computer (9.8).
z Saving the settings to a registration BANK：
Press the 【LOAD】button and the【SAVE】button at the same time, and the
BANK# will flash.
Use the data dial to locate the needed BANK#, then press the【SAVE】button to
save.
z Loading the settings from a registration BANK:
Press the 【LOAD】button and the【SAVE】button at the same time, and the
BANK# will flash.
Use the data dial to locate the needed BANK#, then press the【LOAD】button to
load.
The loaded data will override the current settings without notification. If the
current settings are not saved, after the loading operation the original settings
will lost.
14 Firmware UPDATE
About the UPDATE function:
z With the UF Brain program, you can update the program and data of the instrument
via USB connection. To get the newest UF Brain program, please visit
www.cme-pro.com
15 EXPANSION
z You can use the expansion slot to connect an expansion board, such as a firewire
expansion board, a sound module expansion board, etc.
z Please read the expansion board user’s manual carefully and follow the instructions
to install and use the expansion board.
z Please visit www.cme-pro.com for more information.
To Next Page