CMOSTEK CMT2168A - Page 23

AN279
Rev 0.7 | 23/32
www.hoperf.com
6. WriterConfig.exe -ram -otp -f test_201214.hex –run
Operation: Download the target file test_201214.hex to the offline burner, select Run mode (but do not
perform OTP burn, that is, only download the hex and burn parameters to the offline burner, noted that
the offline burner will poweroff)
7. WriterConfig.exe -ram -otp -fast -f test_201214.hex –run
Operation: Download the target file test_201214.hex to the offline burner, select Run mode (but do not
perform OTP burn, that is, only download the hex and burn parameters to the offline burner, noted that
the offline burner will poweroff)
8. WriterConfig.exe -ram -otp –poweron
Operation: Power on the target chip.
9. WriterConfig.exe -ram -otp -uuid
Operation: Read the 32-bit UUID of the target chip.