AN279
6 Using Notice
The following table lists several precautions for using an offline burner
Table 17. Offline Writer Using Notice
No. Notice
1
After successfully burning the CMT216x series chips, it is not allowed to burn it again
(programm).
2
Before replacing the button battery, press Save to manually save the count value of the current
burning chip into the FLASH and the last saved value will be recovered when the next power on.
Users need to manually save after each burning to ensure the reliability of burning records.
3
Don’t open RFPDK in the process of downloading user programs and configuration parameters
to the burner while using WriterConfig, otherwise it will cause the burner download configuration
parameters error or abnormal failure of the burner for the reason of occupying USB
communication of both the RFPDK and WriterConfig. Thus, do not startup WriterConfig and
RFPDK at the same time when the USB is connected to the burner and the computer to avoid
exceptions
4
CMT216x series chips do not support CMOSTEK genernal WriterConfig software. Users must
download CMT216x WriterConfig specific user program and configuration parameters to the
CMT216x offline burner.
5
CMT216x offline burner uses specific WriterV3.2 burner hardware and cannot use general
CMOSTEK burner hardware.
6
The CMT216x offline burner is distinguished from the general offline burner by the following
methods: the LCD display interface and the outline printing (with CMT216x words).
7
The CMT216x Writer Config software is distinguished from the general Writer Config software by
the following methods: CMT216x WriterConfig is displayed at the top of the CMT216x
WriterConfig interface window and CMOSTEK WriterConfig is displayed at the top of the general
WriterConfig software interface window.
To Next Page
Loading...
