Coachman 2022 - Page 154

Caravan equipment
153
Owners handbook 2022
Emergency opening using
master code
The master code is necessary if guests
have left the safe locked or have forgotten
their code.
Opening safe with the master code
Enter the correct six digit master code.
✓ The display shows the message OPEN.
✓ The door opens.
Changing the master code
You can change the factory setting code
(888888). The safe must be opened for
this.
Enter the correct six digit master code.
Press the CLEAR button.
 The display shows the message NEW.
Enter a new six digit master code.
Press the CLOSE button.
 The display shows the message AGAIN.
Repeat the entry of the new six digit
master code.
Press the CLOSE button again.
NOTICE!
• If you forget your master code, nobody
can access the safe any more (not
even the manufacturer). No resetting,
or similar action, is possible.
• Therefore note down the master code
and store it very carefully in a safe
location.
• The safe has a factory setting code.
We strongly recommend that you
change this code for security reasons.
ºC
SET
!
!
NOTE:
If an incorrect code is entered, the
message E-CODE appears on the
display.
After five incorrect attempts, the safe
lock will remain blocked for
15 minutes and no further entries are
possible. As soon as a button is
pressed, the message HOLD15 appears
on the display.