Chapter 2: Operation
Scan frequencies 31
2222
Edit the scan list
The MF/HF scanning frequency is automatically listed and can only be
changed from the MF/HF radio.
You can add, change or delete additional scanning frequencies in the list.
Select frequencies for scanning
To access the scan list, do as follows:
1. From the SCAN LIST page, select the field you want to access. For
example, select Manual frequencies to access manually entered
frequencies in the scan list.
The list opens.
Scanning on multiple frequencies is primarily intended for
receiving ARQ calls. If many scan channels are specified you may
not be able to receive all incoming FEC calls, because FEC uses a
much shorter phasing sequence compared to ARQ.
To Next Page
Loading...
