Chapter 2: Operation
32 Scan frequencies
2. To enable scanning of a frequency in the list, select the box next to the
frequency.
Only the frequencies with a check mark will be scanned.
3. Select O
K.
To change or delete a frequency in the list
1. Open the scan list as shown above.
2. Select the frequency (not the box) you want to change or delete.
The selected frequency is shown in the right side of the window.
3. To delete the frequency from the list, select D
elete. Then select Yes.
4. To change the frequency, select Edit
.
5. Type in the Receive and Transmit frequencies or select from the list of
Coast stations.
To Next Page
Loading...
