Chapter 3: Service & maintenance
Alerts in the Bridge Alert Management (BAM) system 63
3333
3016/1 C B POSITIO
N: LOST
No position
available.
The SAILOR 6300 MF/HF DSC is
configured to have a position
source, but no position
information is available. Check
your position source. If there is no
information from the position
source, you can enter a manual
position in the SAILOR 6301
Control Unit for temporary use,
see Entering the vessel’s position
manually on page 14.
3016/2 C B POSITIO
N: LOST
No position
available for
10 minutes.
The SAILOR 6300 MF/HF DSC has
previously received position info
from the position source, but has
lost the position input. Check your
position source. If there is no
information from the position
source, you can enter a manual
position in the SAILOR 6301
Control Unit for temporary use,
see Entering the vessel’s position
manually on page 14.
3122
a
W A DISTRES
S:RX
Incoming
distress
An incoming DSC distress is
received. This alert stays active (in
the list of alerts) until the DSC
distress session has ended,
b
3122
a
W A DISTRES
S:
RELAY
Incoming
distress relay
An incoming relayed DSC distress
is received. This alert stays active
(in the list of alerts) until the DSC
distress session has ended.
b
3122
a
WA URGENC
Y:RX
Incoming
urgency call
An incoming DSC urgency call is
received. This alert stays active (in
the list of alerts) until the DSC
urgency session has ended.
b
ID/In-
stance
Prio-
rity
Cate-
gory
Title Description Reasons and remedy
To Next Page
Loading...
