Chapter 3: Service & maintenance
Alerts in the Bridge Alert Management (BAM) system 65
3333
3123/
a
CB GROUP:
RX
Incoming
group call
An incoming DSC group call is
received. The alert is cleared and
removed from the alert list when
you have selected it from the
SAILOR 6301 Control Unit or
answered the call, or when a
timeout period has expired.
b
3008/1 W B TX
POWER:
INHIBIT
Transmission
inhibited at
MFHF TU
Transmission is inhibited at the
Transceiver Unit. This means that
calls made from the MF/HF radio
will not be transmitted.
3115/1 W B ANTENN
A: TUNER
ATU not
responding.
Verify
connection
The Antenna Tuner Unit (ATU) is
not responding. Check the
connection between the MF/HF
radio and the ATU.
a. Dynamic - Alert instance is assigned dynamically. This way there can be more
active alerts of the same ID and title at the same time, as they will be assigned
different instance numbers.
b. See DSC setup on page 44 for details on how to configure the timeout for different
types of calls.
ID/In-
stance
Prio-
rity
Cate-
gory
Title Description Reasons and remedy
To Next Page
Loading...
