Press <USB> to switch between Memory Card, USB, and DVD
modes.
Select Memory Card to play media from SD memory cards
loaded in the Card Slot.
Select USB to play media from USB ash memory drives loaded
in the USB Port.
Select DVD mode to play optical discs (e.g., DVD, CD, or CD+G)
from the disc tray.
The unit must be placed in DVD mode before the Memory Card
and USB modes can be accessed. Press <SOURCE> to switch
to DVD mode rst, then press <USB> on the remote to change
between Memory Card, USB, and DVD/Disc modes.
Load a Disc (or other media)
Press <OPEN/CLOSE> to open the disc tray. Insert a disc with the label-
side up. Press <OPEN/CLOSE> again to close the disc tray.
If a single-sided disc is inserted upside-down, the unit will display
“NO DISC” or “BAD DISC”.
To play from media other than a disc, insert a memory card or
USB ash drive, then press <USB> on the remote to change be-
tween Memory Card, USB, and DVD/Disc modes.
Getting Started
To Next Page
Loading...
