Step
Press <STEP> for frame-by-frame playback. Each successive press
of <STEP> will advance the video one frame. Press <PLAY> to
resume normal playback.
Audio will be muted during fast-forward, fast-reverse, and
stepped playback.
Repeat Playback
Press <REPEAT> to change the repeat playback mode.
Adjusting the Sound
Press <VOL +> to increase the volume level.
Press <VOL –> to decrease the volume level.
Press <MUTE> to turn the volume o completely. Press <MUTE>
again to restore the volume to the previous level.
Press <A-MODE> to change toggle between audio output modes
(.-channel surround and -channel stereo).
Press <CH-LEVEL> to select an audio channel to adjust (e.g., front,
rear, center) and then use the <VOL +>/<VOL –> keys to adjust the
selected level.
Press <TONE> to select BASS or TREBLE and then use the <VOL +>
/ <VOL –> keys to adjust the selected tone.
Press <S.EFFECT> to change the sound eects mode. Set the
sound eects mode to o when playing a Dolby .-channel disc to
avoid interference with Dolby Digital decoding.
Getting Started