On the remote… Function
Press <MEMORY> To save a preset station:
Tune to the desired station (e.g., “92.7”)
Press <MEMORY>
Use the numeric keypad to enter the desired preset
station number (e.g., 2). The radio station “92.7” has
now been saved as preset number 2.
Press <AUTO> Automatically scan for and save stations within
reception as preset stations. Using this function will
over-ride and erase all previously saved presets.
You may press <STOP> to interrupt the auto-scan
process.
Numeric Keypad Input a preset station number to tune to it directly.
(e.g., press <0> then <2> to tune to Preset 2; press
<1> then <5> to tune to Preset 15.
Press <RADIO +> or <RADIO –> Tune to a higher or lower preset station number,
respectively.
Press < SEARCH +> or <SEARCH –> Tune to a higher or lower station frequency, respec-
tively.
Operation Modes
To Next Page
Loading...
