- 10 -
5. Minute or character indicators
6. Character indicators
7. FM frequency unit (MHz) indicator
8. AM frequency unit (KHz) indicator
Remote Control
Preparation
Refer to the drawing and remove the
battery receptacle.
Insert the battery into the receptacle.
Make sure the polarity matches the
marks inside the component.
Insert the receptacle into the remote
control.
Using the Remote Control
Point the remote control towards the
main unit when operating. The remote
control works best at a distance less
than 23 feet (7 meters) and at a
maximum angle of 30°in each direction.
Make sure that no obstacles are in
between the remote control and the
infrared sensor.
The battery normally last for about six
months. This depends on how often and
for what operations the remote control is
used.
To Next Page
Loading...
