- 23 -
A/V Function
A/V Function
The player has an additional A/V input so it can function as a monitor for a VCR,
satellite receiver, video games, etc. When an A/V source is connected, press the A/V
button on the remote control to enter the external input A/V mode.
Picture Parameter Setup
Press the TV/LCD SETUP button once on remote control to enter the PICTURE setup
menu, and screen will display as shown:
Use the _/_ buttons to select the item you want to set (Brightness, Contrast, Color).
Use the _/_ buttons to adjust the items between 0 and 20.
Use the _/_ buttons to select “Language”, press the _/_ buttons to select the language
you prefer.
Select Reset and press the ENT or _ button to return to the factory default settings.
Use the _/_ buttons to highlight “PICTURE”, and press the _ button to exit from the
setup menu.
NOTE: In the A/V mode, if there is no signal, the LCD screen will be blue.
To Next Page
Loading...
