Coby KTFDVD1070 - TV Function - Timer Details; Power On Timer Setting; Power Off Timer Setting; Signal Type Selection

- 22 -
TV Function
Power on
To set the start time of the signal source, use the number buttons to input the desired on
time. Press the _/_ direction buttons to switch between am and pm.
Power off
To set the end time of the signal source, use the number buttons to input the desired off
time. Press the _/_ direction buttons to switch between am and pm.
Signal
Use the _/_ direction buttons to select CATV, ANT, FM or AM.
Channel
Use the number buttons to input the desired TV channel.
NOTE: The power on/off function is active as long as the unit is continuously supplied
with power. The unit will automatically turn on at the set start time and turn off at the end
time each day.