- 20 -
TV Function
Use the _/_ buttons to select the item you want to set.
Use the _/_ buttons to adjust the setting.
Use the _/_ buttons to highlight “TV SETUP”, and press the _ button to exit from the
setup menu. Press the _ button to return to the picture setup menu.
Signal
Use the _ direction button to select CATV TV signal input mode.
Use the _ direction button to select ANT TV signal input mode.
Channel
Use the _/_ buttons to change the channel.
Skip
When the _ button is pressed to turn the function “ON”, it will skip the current channel
when using _/_ to select channels.
When the _ button is used to turn the function “OFF”, channels will not be skipped.
Blue Screen
Use the _ button to turn the function “ON”, use the _ button to turn the function “OFF”.
When this function is “ON” and there is no signal detected in TV mode, the screen will
be blue.
Fine Tuning
Use the _/_ buttons to select “Fine Tuning”, and then press the _/_ buttons to adjust the
reception of the current channel.
To Next Page
Loading...
