Charge the Phone Clip
1. Plug the micro-USB charging cable into the base of the Phone Clip.
2. Plug the other end into a power outlet using the supplied adaptor.
3. While charging, the LED indicator lights red. When fully charged, it
lights green with red flashes every 2 seconds.
4. The first time you charge your Phone Clip, allow it to charge for at
least 3 hours, even if the light indicates a full charge.
If you receive a call it overrides any current audio stream, and you can
either answer or reject the call.
NOTE
Remember to turn off your Phone
Clip when not in use, and keep it
charged. Nominal talk time is 6
hours for the Phone Clip (80 hours
on standby).
© Cochlear Limited 2017 Wireless Accessories - 23
Phone Clip
To Next Page
Loading...
