Change the accessory mixing ratio
To adjust the audio mixing ratio between the wireless accessory and
your sound processor microphones:
1. On your CR230 Remote Assistant, from the Home screen, press
the right arrow button until you reach the Settings screen and
press the OK button.
2. Press the right arrow until you get to the Accessory Mix screen.
Press OK.
3. Press the up or down arrow button to change the mix.
For more information see your CR230 Remote Assistant User Guide.
NOTE
You can only do this using the
CR230 Remote Assistant in
Advanced Mode.
© Cochlear Limited 2017 Wireless Accessories - 29
To Next Page
Loading...
