Using multiple accessories
Your sound processor can be paired to more than one wireless
accessory. Each accessory needs to be allocated its own 'channel'.
If you have already paired a wireless accessory as per the instructions in
this guide, it will be in channel 1.
To pair to another accessory,
you must select a free
channel.
Your sound processor has 3
channels that can be paired
to a Mini Microphone or TV
Streamer.
For the Mini Microphone and TV Streamer:
If you want to pair to a Mini Microphone or TV Streamer, you must
select a free channel (or the newly paired accessory will replace the
existing one).
If your sound processor is not paired to any wireless accessories, then
press the pairing button on your wireless accessory 1 time to pair to
channel 1.
• 2 presses for channel 2.
• 3 presses for channel 3.
The screen shot below shows the Remote Assistant's
Stream selector screen with a Mini Microphone
paired to channel 1 and a TV Streamer paired to
channel 2.
TIP
Use your CR230 Remote Assistant's
Stream selector screen to display which
channels are already allocated.
NOTE
The Phone Clip uses its own dedicated
channel, so you do not need to select a
channel when pairing and it will never show
up in the Stream selector screen.
28 - Wireless Accessories © Cochlear Limited 2017
To Next Page
Loading...
