Once assembled, your
sound processor will turn
on automatically. A green
light will flash to indicate
the number of your current
program.
To turn your sound
processor off, disconnect
the battery, or press and
hold the control button for
five seconds, until it turns
off. The light will change
to orange as the sound
processor turns off.
To turn on again, connect
the battery, or if the battery
is already connected, short-
press the control button.
Your clinician can set up
your sound processor to
turn off automatically when
it has been off your implant
for two minutes. This
feature is not available for
pediatric recipients.
5 sec
2 min
5 6 7 8
or
13
To Next Page
Loading...
