Using Aqua+
*
The Cochlear Nucleus 7
Aqua+ is a re-usable
sealable cover that keeps
your Cochlear Nucleus 7
Sound Processor dry during
use in or around water.
For your sound processor to
work inside Aqua+ you must
use rechargeable batteries.
First carefully unplug your
usual coil by holding the
coil cable grip and firmly
pulling it straight out of the
sound processor. Be careful
not to pull on the coil
cable or twist when you
pull it out.
Leaving your earhook on,
insert your Nucleus 7 Sound
Processor into Aqua+. Avoid
bending the earhook, or
detaching it from the sound
processor.
Once your sound processor
is inside, insert the plug into
the base of Aqua+. To make
a good seal, push the plug
in as far as it will go.
2 3 41
Enjoy all your favorite water activities and be confident
that your sound processor is safe and dry.
Do not twist
* Nucleus 7 with Aqua+ is water resistant to level IP68 of the International Standard IEC60529. This water protection rating means that the
sound processor with the Aqua+ can be continuously submerged under water to a depth of 3 meters (9 feet and 9 inches) for up to 2 hours.
This water protection only applies when you use the Aqua+ and LR44 alkaline or nickel metal hydride rechargeable batteries.
38
To Next Page
Loading...
