Gripping the black ring on
the coil connector, plug the
Aqua+ Coil (with magnet)
straight into your sound
processor through the hole
in Aqua+, being careful
not to twist. The coil
plug should feel securely
connected.
If you’re concerned about
losing your Aqua+, use a
Safety Line to clip your
processor to your clothing,
or a Mic Lock-Stirrup to
hold your processor on your
ear.
When you’re finished in the
water, rinse Aqua+ and the
Aqua+ Coil with clean fresh
water and dry with a soft
cloth before removing the
sound processor.
To unplug the blue Aqua+
Coil, grip the black ring on
the coil connector and pull
the plug straight out. Then,
open Aqua+ and remove
your sound processor.
Re-attach your usual coil by
pushing the coil cable into
the sound processor until it
clicks, being careful not to
twist.
Place Aqua+ and the blue
Aqua+ Coil in your dry
aid kit overnight. Once
thoroughly dry, store
Aqua+, the blue Aqua+ coil
and any accessories in the
Nucleus 7 Activity Kit’s
waterproof case.
5 6 7 8
Do not twist
8 hr
39
To Next Page
Loading...
