The USB Battery Charger
charges one rechargeable
battery module at a time.
To use, remove the covers
from the charger.
Fit the rechargeable battery
module to the charger
at a slight angle. Twist to
connect.
Plug the charger into a
power outlet or USB port.
If you use a power outlet,
plug the charger into the
USB Adaptor and then plug
the adaptor into the power
outlet.
The LED flashes green while
charging.
The LED changes to steady
green when the module is
fully charged.
1 2 3 4
USB
Battery
Charger
17
To Next Page
Loading...
