Leave the microphone cover sleeve on your processor when storing it
overnight in the Dry & Store unit.
To remove the microphone cover sleeve:
1. Remove the coil cable from
the processing unit. Hold the
coil cable by the grips and
firmly pull it straight out of
the socket on the processing
unit. Do not twist
2. Slide the microphone cover
sleeve off the processing
unit.
Make sure that you remove the microphone cover sleeve before using
the monitor earphones to check the sound.
Care for the microphone cover sleeve:
• Regularly check the state of the microphone cover sleeve.
• Change the microphone cover sleeve if it does not fit properly, or if
you notice any tearing.
© Cochlear Limited 2016 CP802 Sound Processor User Guide - 17
To Next Page
Loading...
