Changing processor parts
Change the earhook
If the earhook becomes loose, you should replace it with a new one.
1. Remove the earhook by
pulling it upwards.
2. Attach the new earhook by
pushing it back into place.
Tip: The Cochlear
™
Nucleus
®
CP802 Tamper Resistant Earhook requires
significant effort to remove. This earhook can be used to reduce the
risk of children removing it from the processor.
Change the coil cable
If the coil cable is too short or too long for comfort, or if it is damaged,
change the coil cable.
1. Hold the coil cable by the
grips and firmly pull it
straight out of the socket
on the processing unit.
Do not twist.
2. Hold the base of the plug
and firmly pull the coil cable
straight out of the coil.
24 - CP802 Sound Processor User Guide © Cochlear Limited 2016
To Next Page
Loading...
