24
5-3. Audio
Select Audio and confirm it with OK key
5-3-1. Equalizer
You can set one of Normal, Classic, Live, Pop, Rock, Jazz, Dance, Vocal, Soft or Bass.(※ default :
Normal)
5-3-2. DRC(Dynamic Range Compression)Mode
※ Default : ON
5-3-3. SPDIF and Speaker Out
You need to do Audio setup properly according to your speaker, external amplifier or DAC that
you want to connect to X10.
5-3-3-1. Default setting
You should keep default setting like below picture when you connect a bookshelf speaker (passive)
to X10’s Speaker Out connector, you connect a headphone or an external amplifier to the Line
Out of X10.
Default setting is that SPDIF is OFF and Speaker Out is OFF(Headphone) like below.
To Next Page
Loading...
